Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals, Low-power auto self refresh (LPASR), Data bus inversion (DBI) for data bus, Temperature controlled refresh (TCR).
Series
Basic
Weight
35 gm (Gross)
Part No
NTBSD4P32SP-08
Voltage
1.35V
Heatsink
No
RAM Type
DDR4
Specialty
Netac Unbuffered DDR4 SDRAM DIMMs (Unbuffered Double Data Rate Synchronous DRAM Dual In-Line Memory Modules) are low power, high-speed operation memory modules that use DDR4 SDRAM devices. Each 288- pin DIMM uses gold contact fingers. The SDRAM Unbuffered DIMM is intended for use as main memory when installed in systems such as PCs. Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals. Low-power auto self refresh (LPASR). Data bus inversion (DBI) for data bus. On-die VREFDQ generation and calibration. On-board I2C serial presence-detect (SPD) EEPROM. Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS). Selectable BC4 or BL8 on-the-fly (OTF). Databus write cyclic redundancy check (CRC). Temperature controlled refresh (TCR). Command/Address (CA) parity. Per DRAM Addressability is supported. 8 bit pre-fetch. Fly-by topology. Command/Address latency (CAL). Terminated control command and address bus. Gold edge contacts. RoHS Compliant and Halogen-Free.
